The placer tin ore beneficiation production line is a production line for extracting tin minerals from the placer tin ore. The placer tin ore beneficiation production line is mainly composed of trommel washers, spiral washers, jigs, dewatering screens, and other equipment. Due to the complex nature of tin minerals, the content in the placer ore is also different. Therefore, to determine the production line of the placer tin ore beneficiation, it must be designed according to the specific nature of the placer tin ore and customer requirements.
Forui Machinery is a professional manufacturer of placer and tin ore beneficiation production line design and beneficiation equipment. Next, let me share with you the placer and tin ore beneficiation production line of Forui Machinery.
Alluvial Tin Ore Beneficiation Process
The beneficiation method of the placer tin ore is mainly the gravity beneficiation method, and the gravity beneficiation method is used as the core separation method for both roughing and beneficiation. Due to the extremely low content of tin minerals in placer ore, tin minerals must be purified by beneficiation methods. Therefore, a series of placer tin ore beneficiation equipment is used to form a complete placer tin ore beneficiation production line.
Under normal circumstances, the beneficiation of placer tin ore must first be screened. Since most of the river pebbles in the placer tin mine are waste rocks, these waste rocks do not contain tin minerals. Therefore, it is necessary to use a trommel to discard large pieces of river pebbles and other waste rocks and then enter the gravity beneficiation process.
Some placer tin mines contain more viscous soil. The viscous soil greatly reduces the screening effect of the trommel screen. The screening process is difficult to carry out. At this time, a trommel washing machine with two functions of washing and screening can be used. The placer tin ore enters the trommel washing machine for ore washing. At the end of the washing machine, the minerals are divided into several different grades, the coarse waste rock is discarded, and the fine materials are sent to the spiral washing machine for washing and dewatering again.
After being washed and dehydrated by the spiral washing machine, the fine-grained minerals are sent to the jig for gravity beneficiation. The jig machine is equipment for beneficiation based on the difference between the specific gravity of tin minerals and waste alluvial. Because the specific gravity of tin ore is greater than waste alluvial, and the tin minerals in placer tin ore are completely separated from the waste rock, they are recovered by gravity beneficiation. The effect is very significant.
The use of jigs for beneficiation has the advantages of small equipment investment, low beneficiation cost, high production capacity, and no pollution. Therefore, gravity beneficiation of placer tin ore with jigs is the most ideal and scientific beneficiation method. The tailings after ore beneficiation by the jig will enter the dewatering screen and be transported to the destination site for storage, and the excess water will be returned to the water circulation system for the jig to use.
This is the beneficiation process of placer tin ore, which is very simple and efficient. It is suitable for the beneficiation of various placer tin ore. The alluvial tin ore beneficiation production line of Forui Machinery has been successfully applied in many countries and regions, and has been recognized and praised by customers.
Placer Tin Ore Beneficiation Production Line
Mongolian placer tin ore beneficiation production line
The Mongolian placer tin ore beneficiation production line uses trommel washers, spiral washers, jigs, linear dewatering screens, and other equipment to form three placer tin ore beneficiation production lines, which can process 2000 cubic meters of placer tin ore every day, and the beneficiation effect is significant. It was highly praised by Mongolian customers.
Indonesia’s alluvial tin ore beneficiation production line
The Indonesian placer tin ore beneficiation production line adopts the processes of chute desliming, trommel screening, gravity beneficiation by jig machine, and dewatering by dewatering screen, forming a 2,000-ton placer-tin ore beneficiation production line per day. The beneficiation effect is remarkable and has won customers Highly recognized.
Russia’s placer tin ore beneficiation production line
The Russian placer tin ore beneficiation production line adopts the process of trommel screen screening, jig machine gravity beneficiation, and linear dewatering screen dewatering, forming a placer tin ore beneficiation production line with a daily processing capacity of 1,000 tons. The beneficiation effect exceeds expectations and has won the height of the customer. Recognized.
Tantalum Niobium Tin Ore Beneficiation Plant in nigeria
Gongyi Forui Machinery Factory is a high-quality enterprise specializing in the production of beneficiation equipment. Over the years, it has produced gravity beneficiation, magnetic separation, flotation, and other beneficiation equipment, and has accumulated a lot of practical experience. Forui Machinery is involved in a lead-zinc ore, gold ore, fluorite, barite, pyrite, hematite, limonite, magnetite, manganese ore, antimony ore, tungsten ore, tin ore, celestite, etc. In the field of beneficiation of a variety of minerals, fruitful results have been achieved.
If you need equipment quotation and process flow, please feel free to Contact Us: