What Methods and Equipment Should be Used to Improve the Grade of Fluorite

Search
Generic filters

1.Overview

Fluorite Sample
Fluorite Sample

The main component of fluorite is calcium fluoride, which is mainly used in metallurgy and chemical industries. The fluorite used in the metallurgical industry is called metallurgical grade fluorite, mostly in granular or massive form, and is a high-grade fluorite. The fluorite ore used in the chemical industry is mainly used to produce hydrofluoric acid, called acid-grade fluorite, which is a high-quality fluorite powder ore.

2.Separation Principle

Due to the high relative density of fluorite and the low relative density of gangue associated with fluorite, there is a certain specific gravity difference between them, so the gravity beneficiation method can be used to recover fluorite. The commonly used gravity processing equipment is the jig concentrator.

The Working Principle of the Jig Machine

AM30 Mineral Jig Concentrator
AM30 Mineral Jig Concentrator

The jig machine uses water as the beneficiation medium. Under the action of the electric motor, the transmission mechanism of the jig machine can make regular movements, and at the same time drive the rubber diaphragm to make reciprocating motion, thereby causing the water flow in the jig machine to produce periodic sinusoidal fluctuations. Under the action of the vertical alternating current of the minerals entering the jig, the sedimentation speed of the denser mineral particles in the water is fast, while the sedimentation speed of the less dense mineral particles in the water is slow. Therefore, this process roughly divides the material entering the jig into two material layers. Heavy minerals enter the concentrate tank through the screen, and light minerals are discharged from the tailing tank, thus completing the entire beneficiation process.

Mineral Layered Process in the Jigging Separeation
Mineral Layered Process in the Jigging Separeation

3.Mineral Processing Flowsheet

3.1 Mineral Processing Requirements

Size: -300 mm
Capacity: 80-100 TPH

3.2 Mineral Processing Flowsheet

Fluorite Processing Flowsheet
Fluorite Processing Flowsheet

Gongyi Forui Machinery Factory is a high-quality enterprise specializing in the production of beneficiation equipment. Over the years, it has produced gravity beneficiation, magnetic separation, flotation, and other beneficiation equipment, and has accumulated a lot of practical experience. Forui Machinery is involved in a lead-zinc ore, gold ore, fluorite, barite, pyrite, hematite, limonite, magnetite, manganese ore, antimony ore, tungsten ore, tin ore, celestite, etc. In the field of beneficiation of a variety of minerals, fruitful results have been achieved.

If you need equipment quotation and process flow, please feel free to Contact Us

Forui Mining

FREE
VIEW